How to Setup Multiple TAS Market Map?

THE PROBLEM: How to setup multiple TAS Market Map in the NinjaTrader 7 chart.

THE CAUSE: Settings required to install multiple TAS Market Map.

THE CURE: Follow the step-by-step instructions provided below to install multiple TAS Market Map in the chart.

*Example we'll be creating 3 TAS MarketMap on the chart.

Quick Guide

STEP 1: I Right-click on the chart, select Indicators...

STEP 2: On the Indicator window, scroll-down and look for the TAS_MarketMap.

STEP 3: To add the 3 TAS MarketMap, click the NEW button 3 times. This will end up 3 TAS MarketMap on your list of indicators to be added on the chart located on the lower-left corner pane.

STEP 4: Change the parameters of the 2nd and 3rd TAS MarketMap so it will be printed on a different area in the chart. 

STEP 5: Select the 2nd TAS MarketMap. On the list then on the right pane under Parameters section change the Bar1 = 100 and Bar2 = 51.

STEP 6: Select the 3rd TAS MarketMap. On the list then on the right pane under Parameters section change the Bar1 = 150 and Bar2 = 101.

STEP 7: When you're done with the settings just hit the OK button and you're done. This is how it will look like after setting the 3 MarketMap.

STILL NEED HELP? Create a support ticket by emailing the Help Desk team at [e-mail].