How to configure my TAS Navigator on Tradestation 9.5 Chart?

THE PROBLEM: When attempting to add the TAS Navigator to the chart, the format is different from the manual.

THE CAUSE: During installation of the TAS Indicators, the TAS Navigator were installed not formatted as default in TradeStation 9.5. 

THE CURE: Follow the step-by-step instructions provided below to setup the TAS Navigator into the correct format in Tradestation 9.5. 

Quick Guide

To setup Navigator on TradeStation you will need to modify the settings for TSI, Sideways and vSMA only.

STEP 1: Add the TAS Navigator on the chart by right-clicking any space on the chart and selecting Insert Analysis Technique...

STEP 2: Select Indicator tab, select TAS_Navigator on the list and click OK. Either the indicator will not appear on the chart or the TAS Navigator is not showing correctly on the chart.

STEP 3: Right-click again on chart, select Format Analysis Techniques...

STEP 4: Select the TAS Navigator and click Format… 

STEP 5: Select Style tab.

STEP 6: Change vsMA & Sideways' type to Points and Weight to the 3rd thickness.

STEP 7: Change TSI type to Histogram and Weight to the 3rd thickness.

STEP 8: Check Default to use any changes that you made as your default setting.

STEP 9: Select the Scaling tab, change the Scale On to “Right Axis” and Sub-graph to 2.

STEP 10: Check Default to use any changes that you made as your default setting.

STEP 11 FINISH SETUP: Click OK to apply changes and close the Customize Studies & Strategies window. You're done and the TAS Navigator will appear on the chart's pane 2.

STILL NEED HELP? Create a support ticket by emailing the Help Desk team at [e-mail].