THE PROBLEM: When attempting to add the TAS Navigator to the chart, the format is different from the manual.
THE CAUSE: During installation of the TAS Indicators, the TAS Navigator were installed not formatted as default in TradeStation.
THE CURE: Follow the step-by-step instructions provided below to setup the TAS Navigator into the correct format.
STEP 1: Right-Click on your chart, go to Studies -> Add Study…
STEP 2: Click TAS_Navigator_2.2C (current version) and hit the OK button.
STEP 3: Again, right-click on chart, go to Studies -> Edit Studies…
STEP 4: Under the Customize Studies & Strategies window, highlight the TAS_Navigator and click Customize…
STEP 5: At the Customize Indicators window, go to Style tab. In the Plots pane, you’ll need to configure or setup the vsMA, Sideways, and TSI only.
STEP 6: Here’s a snapshots below of the settings for vsMA, Sideways, and TSI. In the Weight Pane, adjust the size of thickness as personal preference.
STEP 7: When done, click the Default button when ask to change the default settings just hit YES to save settings.
STEP 8: Next, go to the Scaling tab, on the Axis: Scale On drop-down, select “Right Axis” and Sub-graph= 2 (Designates the indicators on the lower region of the chart and may vary). Click the Default button and hit YES to save the settings. Then click OK and then close the Customize Studies & Strategies window.
STEP 9 FINISH SETUP: This is how the TAS Navigator will look like after setup and you’re done.
STILL NEED HELP? Create a support ticket by emailing the Help Desk team at Help@TASMarketProfile.com.