THE PROBLEM: When attempting to add the TAS Boxes to the chart, the format is different from the manual.
THE CAUSE: During installation of the TAS Indicators, the TAS Boxes were installed not formatted as default in TradeStation.
THE CURE: Follow the step-by-step instructions provided below to setup the TAS Boxes into the correct format.
STEP 1: Right-Click on your chart, go to Studies -> Add Study…
STEP 2: Click TAS_Boxes_2.2C (current version) and hit the OK button.
STEP 3: Again, right-click on chart, go to Studies -> Edit Studies…
STEP 4: Under the Customize Studies & Strategies window, highlight the TAS_Boxes and click Customize…
STEP 5: At the Customize Indicators window, go to Style tab. In the Plots pane, you’ll need to configure or setup the TOP, CTR, and BOT Leave the ScanTOP,ScanCtr,ScanBot as it is.
STEP 6: In the Plots Pane, Select TOP. In the TYPE Pane select Point. And in the Weight Pane, just select the visible thickness of the TAS Boxes on your chart. Example below as preferred setup. Do this for the CTR and BOT.
STEP 7: When done, click the Default button when ask to change the default settings just hit YES.
STEP 8: Next, go to the Scaling tab, on the Axis: Scale On drop-down, select “Same Axis as Underlying Data”. Click the Default button and hit Yes to save the settings. Then click OK and then close the Customize Studies & Strategies window.
STEP 9 FINISH SETUP: This is how the TAS Boxes will look like after setup and you’re done.
STILL NEED HELP? Create a support ticket by emailing the Help Desk team at Help@TASMarketProfile.com.